Sievi Safety Boots
This
Sieve safety boots has a steel toecap and midsole, it is resistant to oil and
most chemicals, water repellant and anti-static. It has a warm lining
and a zip fastener on the inside of each boot.
Toecap Protects toes from falling objects and compression. Its shock resistance is 200 J and resistance to compression 15 000 N.
Steel midsolePrevents sharp objects from penetrating through the sole. Its resistance to nail penetration is 1100 N.
Heat resistance Safety footwear equipped with this symbol can be worn in hot environments. Sievi's nitrile rubber sole withstands heat up
to 300 °C.
Antistatic Footwear
equipped with antistatic design discharges the static electricity
accumulating over the body. The tolerances of the resistor are
100 kiloohms ... 1000 megaohms.
ESD
Light and snug ESD shoes and boots are controllable and safe method of discharging the static
electricity accumulating over your body. The limit values of ESD footwear resistors are stricter than
with normal antistatic footwear (100 kiloohms ... 35 megaohms). Wearing ESD professionals you can
avoid damaging extremely sensitive electronic equipment.
Warm lining Footwear
equipped with this symbol can be worn in cold conditions. The material
keeping the cold out is either lamb's wool or artificial material. In
addition, part of the range is lined with effective Thinsulate fibre.
Water-repellent Sievi uses water-repellent leather. Its water resistance meets the requirements of the EN 345 standard.
Energy absorbency
The sole structure designed by Sievi provides the footwear with good
energy absorbency which prevents shocks from causing damage to feet,
knees and back.
Zipper Models marked with this symbol have a useful zipper.
Approved to EN ISO 20345 S3