• Shoe conforms to EN345
• Leather Upper
• Light weight dual density
• Polyurethane Sole
• 200 Joules Toe Cap

200 Joules Toe Cap	Antislip	Antistatic	Chemical Resistant
Oil Resistant	Shock Absorption

'Safe-Eyes' comply to EN 1731:2006, impact rated at; 45m/s, with coverage complying with EN166:2001, and marked "F", similar to the majority of standard safety glasses.

Applications

• Arboriculture
• Forestry
• Construction
• Sawmilling
• Horse Riding
• Mining
• Tunnelling
• Agriculture

• Un-Fog-Able
• Scratch Resistant
• Robust
• Great Peripheral Vision
• One Size Fits All

This Sieve safety boots has a steel toecap and midsole, it is resistant to oil and most chemicals, water repellant and anti-static. It has a warm lining and a zip fastener on the inside of each boot.

Toecap Protects toes from falling objects and compression. Its shock resistance is 200 J and resistance to compression 15 000 N.
Steel midsolePrevents sharp objects from penetrating through the sole. Its resistance to nail penetration is 1100 N.
Heat resistance Safety footwear equipped with this symbol can be worn in hot environments. Sievi's nitrile rubber sole withstands heat up to 300 °C.
Antistatic Footwear equipped with antistatic design discharges the static electricity accumulating over the body. The tolerances of the resistor are
100 kiloohms ... 1000 megaohms.
ESD Light and snug ESD shoes and boots are controllable and safe method of discharging the static electricity accumulating over your body. The limit values of ESD footwear resistors are stricter than with normal antistatic footwear (100 kiloohms ... 35 megaohms). Wearing ESD professionals you can avoid damaging extremely sensitive electronic equipment.
Warm lining Footwear equipped with this symbol can be worn in cold conditions. The material keeping the cold out is either lamb's wool or artificial material. In addition, part of the range is lined with effective Thinsulate fibre.
Water-repellent Sievi uses water-repellent leather. Its water resistance meets the requirements of the EN 345 standard.
Energy absorbency The sole structure designed by Sievi provides the footwear with good energy absorbency which prevents shocks from causing damage to feet, knees and back.
Zipper Models marked with this symbol have a useful zipper.

Approved to EN ISO 20345 S3

• Type FFA1P2D.
• Approved to EN 405:2001.
• Assigned Protection Factor 10 (Gas).
• Assigned Protection Factor 10 (Particulates).

Also ideal for decorating and D.I.Y.

Our TPS Temporary Protective Sheeting is 4mts x 25mts

• Approved and kitemarked to EN 397 including, lateral deformation, molten metal, +440 volts AC; suitable for use in temperatures of down to -30°C.
• Optionally tested to +1000 volts AC and temperatures to -40°C.
• Easily adjustable sizing: range 51 cm to 63 cm.
• Manufactured from ABS, ensuring a high quality, durable finish.
• Includes as standard the unique Centurion six-point Terylene head harness and Hydro Flock Sweatband for optimum comfort. Integrated Visor.
• Fully retractable visor.
• Standard prescription spectacles can be worn comfortably underneath visor.
• No nose moulding therefore increasing safety and visibility.
• Visor approved and kitemarked to EN 166 including B: medium energy impact.

CAT Supremacy SRX Safety Boots

Filtering masks, for protection against dust/mist/fumes, lightweight, maintenance free, individually packaged. Approval to EN149:2001 FFP2 Valved

Download Factsheet Here (PDF File opens in new window)

• 100% Polyester
• Blade width 3.25"/8cm
• Length 57"/144cm
• One size
• Wipe clean only

A soft Cotton heavy weight polo,the Ultimate is a fantastic choice if you’relooking for a softer touch.

• low maintenance equals high cost efficiency
• A flexible nose area ensures a secure seal on any nose
• Available in 3 different sizes
• The low profile design ensures a wide field of vision

OUTER JACKET

• GORE-TEX® Performance Shell providing excellent waterproof protection.
• Full length zip with hook and loop fastened double storm flap
• Simple rollaway, zip off hood.

INNER JACKET

• 100 weight spectrum micro fleece with full length zip to fit outer jacket.
• Two large hand warmer pockets.

• Forward/reverse rotation
• Variable speed trigger
• Torque limiter
• 3 function
• Double insulated
• Rotary only
• Rotary hammer
• Hammer only

• Carry case
• Side handles
• Depth stop

Rotationally moulded from UV stabilised linear low density polyethylene, Injection moulded screw fit base with high tensile ‘Shock Cords’ to fit ‘Unibase’.

• Fitted with BS873: Part 6 Des 2 Sleeve
• Ideal for delineating traffic in areas such as: Airports, Car Parks, Docks Springback Cylinder
• post Available in 2 Heights: 45cm/18”, 75cm/30”

Product		Description
Springback Cylinder Post		Rotationally moulded from UV stabilised linear low density polyethylene, Injection moulded screw ...

• 50% Polyester/50% cotton - 280g
• Acrylic pile insulation - 600g in body
• 100% polyester padded quilted sleeves - 120g
• Lining 100% Nylon
• 2 front pockets
• 2 scewed chestpockets with zippers
• Zip pen pocket on left sleeve
• Mobile phone pocket with velcro closure
• Elastic rib cuffs on sleeves and waist

• Specifications 190 GSM 65% Polyester 35% Cotton
• Reactive Dyed
• Knitted Collar
• Taped Neck
• Hemmed Sleeve & Bottom
• Washable at 60 Degrees
• 3 Self Coloured Button Placket

√ Improved co-ordination

√ Reduced tension

√ Happier mood

All Calming Aromatherapy products have, as an ingredient, a sophisticated fragrance blend that creates a distinctive oriental musk fragrance with top notes of tangerine and bergamot supported by floral undertones together with the warmth of clove and cinnamon.

_{^{Helly Hansen’s “Best Selling” kneepad trouser. Loaded with all the features you would expect from your kneepad trousers and far more besides. Made from tough durable Polycotton and reinforced with Nylon Cordura for extra strength and comfort, available in two leg lengths. The enormous attention to detail will come as a surprise once you checkout the competitive price, its easy to see why these pants are a “Best Seller”.}}

_{^{65% Polyester / 35% Cotton - 275g
• Reinforcements: 100% Nylon Cordura® - 220 g
• 2 hanging front nail/screw/tool pockets in Cordura® with angled corners and double
bottoms with option to insert into bellowed front pockets
• 2 bellowed front pockets
• Broad belt tunnel at back for extra strength and stability
• Extra strength polyester click.on™ loops for additional accessories at front and sides
• Belt loops with regular click.on™ loops for additional accessories at the back
• Extra strong loops with double Velcro closure on both sides for hammer holders
• 2 bellowed back pockets, 1 with flap and Velcro closure
• Thigh pocket with flap with space for carpenter’s pencil and additional accessories
/ tools
• Ruler pocket with button for fastening of knife and extra pocket for tools.
Loose attachment at bottom for added flexibility
• Kneepad pockets in Cordura® with 2 top opening options rendering +/- 5 cm
difference and flexibility in knee pad positioning
• Gusset in crotch for better fit and additional freedom of movement}}

Dry, Warm & Safe just about sums up what you get with this jacket, a fully featured long blouson style that is comfortable to wear in a broad range of nasty weather conditions.

Extreme weather protection - Helly Tech - Waterproof/Breathable - EN343

• EN 471, Class 3
• EN 471 colour: 100% PU coated Polyester
• Contrast colour: 100% PU coated Nylon
• Padded lining - 100% Polyester - 120g
• Lining: 100% Nylon
• Oil repellent
• Taped seams
• 1 chest pocket with zip closure
• Mobile pocket
• Reflective tape
• 2 hand pockets with zip closure under flaps
• 2-way storm flap with zipper and Velcro closure
• Detachable hood with drawcord adjustment and velcro top adjustment
• click.on™ loops for additional accessories under flaps
• Drawcord adjustment at hem
• Elastic cuffs with velcro adjustment

• AC power adapter
• 12 month manufacturer's warranty

4-XL ONLY AVAILABLE IN NAVY BLUE COLOUR

• 350 Grams
• 50% Polyester 50% Cotton
• Reactive Dyed
• V-Neck
• Set in Sleeve
• Lycra Ribbed Cuffs, Welt & Neck
• Twin Needle Stitching at Neck, Shoulders, Armholes & Sleeves
• Half Moon at Back Neck

• • Two reinforced free nail pockets which can be placed inside the front pockets with bellows
• •  Two back pockets with bellows
• •  Hammer loop
• •  Strong fly zip
• •  Reinforced rule pocket with a penpocket and knife-holder
• •  Leg pocket with a pen pocket and extra pocket
• •  Knee pad pockets in Cordura®
• •  Telephone pocket
• •  Key loop

• Shoe conforms to EN345
• Leather Upper
• Light weight dual density
• Polyurethane Sole
• 200 Joules Toe Cap
• Steel midsole
  

200 Joules Toe Cap	Antislip	Antistatic	Chemical Resistant
Oil Resistant	Shock Absorption	Steel Midsole

• 90/10 Down feather mix.
• Full length centre front zip.
• Warm fleece lined collar.
• Two zipped hand warmer pockets.
• Zipped chest pocket.
• Zipped internal pocket.
• Retained elasticated hem draw cord.
• Half elasticated hook and loop adjustable cuffs.

• Ribbed knitted collar
• Double stitched sleeve
• 95% cotton/5% elastan, 210g/m²

• Compact, well balanced and easy to use circular saw with 55 mm cutting depth/li>
• Quick and easy depth and angle adjustment/li>
• High torque motor for durability and power for cutting job site and joinery materials/li>
• Aluminium shoe for accuracy and durability/li>
• Efficient dust extraction ports to minimize airborne dust particles when connected to an extractor unit/li>
• Gears and drive spindle mounted in durable cast aluminium housing/li>
• Cutting line visibility and guiding notches for 45° and 90° cuts/li>
• Compatible with DEWALT guide-rail system Ref. DE6287 & DE6288 for converting into a convenient, on-site portable alternative to a stationary panel saw

• Precision 12 tooth saw blade
• Rip fence
• Blade spanner
• Sawdust adapter

• 220 GSM
• 50% Polyester 50% Cotton
• Reactive Dyed
• Knitted Collar
• Half Moon Yoke
• Open Hem Sleeve
• Taped Shoulder & Back Neck
• Side Vents
• Twin Needle Stitching
• 3 Button Placket

• Cotton twill cap
• Structured 6 panel
• Low profile
• Short touch strap

Features:

• Dimensions: L:153-168 W:137mm
• Weight:26g / 0.85oz
• Nose contact: Soft nose grip
• Ear contact: Flexi soft grip
• Mechanical strength: CE EN 166 1FT
• Optical Standard: Class 1
• Lens Coatings: Anti fog / anti scratch

• Lightweight full-view lens
• Built-in moulded browbar
• Soft, adjustable nose piece
• Adjustable temple length and lens angle
• Abrasion-resistant polycarbonate lens
• Adjustable, break-away Flexicord retainer for added security and convenience in your active work environment
• Weight: 30g

• Quality tan leather upper with synthentic fur lining.
• SAMSON dual density PVC / rubber, heat, oil and acid resistant sole.
• Deep cleated sole is anti clogging and provides contact heat resistance to 300'C
• Scuff resistant toe covering.
• 200 joules steel toe cap
• Penetration resistant steel midsole

Features:

• Dimensions: L:153-168 W:137mm
• Weight:26g / 0.85oz
• Nose contact: Soft nose grip
• Ear contact: Flexi soft grip
• Mechanical strength: CE EN 166 1FT
• Optical Standard: Class 1
• Lens Coatings: Anti fog / anti scratch
  

Fabric:

• 100% nylon oxford with storm blocker waterproof, breathable finish
• 100% polyester tricot lined body,hood and inside collar
• 100% polyester taffeta lined and sleeves
• 200gsm polyester fill insulation

Features:

• CAT logo rubber patch on left pocket flap
• Fully taped seams
• Back shoulder gussets for ease of movement articulated elbows
• Underarm vents with zippers
• Front patch pockets with top flap closure and slash pockets with zippers
• Left chest vertical zip pocket and inside mobile pocket
• Full zip front with YKK zipper and storm flap
• 3 piece snap off hood and hidden adjustable storm cuffs
• Available sizes are Small to XX-Large

• Black Leather Upper
• Rubber Sole Unit
• Anti Slip Sole Unit
• 200 Joule Steel Toe Cap
• Sole unit resistant to oils, acids and alkalis
• Heat resistant sole unit to 300°C
• EN Level EN345 SB
• Available in sizes 6 - 12

Dräger X-plore® 1700 is the new generation of particle filtering face pieces which offer effective protection against fine dust and solid and liquid particles that are present in diverse application areas. The product range offers masks for all three EN protection classes in accordance with EN149:2001, FFP1, FFP2 and FFP3. These masks are optionally available with the CoolMAX™ exhalation valve for additional comfort. Odour stopping versions, containing an activated carbon layer against unpleasant odours are ideal for users which battle with nuisance odours.

Download Factsheet Here (PDF File opens in new window)

The Uppsala Jacket is consistently in our top 10 Cold weather best sellers list, extremely hard wearing with tremendous freedom of movement in the arms.  Count on a Warm stylish smart and versatile looking four pocket jacket.

• PU Lightly Coated Heavy Duty, 100% Polyester - 240g

• Quilted insulation, 100% Polyester - 120g in body & 80g in sleeves

• Lining 100% Nylon

• Fleece inside collar

• 2 chest zip pockets with flap

• Phone pocket

• 2 hand pockets with flap and zip closure

• Concealed zip pocket under storm flap

• 2 way zip under front storm flap

• Detachable hood

• click.on loops for additional accessories

• 3M reflective fabric

• Extended back

• Softane™ and Neotril™ combination sole with built in progressive shock absorber, where the Softane™ layer reduces weight and provides increased comfort, and the Neotril™ layer provides outstanding resistance to acids, alkalis and hydrocarbons together with resistance to direct contact heat up to 300ºC
• The deep sole pattern (6.5mm) is multidirectional for all terrain grip
• Steel toe cap and mid sole
• Approved to EN345, S3 CI HRO

• abrasive belt
• cork/carbon pad
• dust bag
• 12 month manufacturer's warranty

• Highest levels of impact and penetration protection
• Superior fit and enhanced wearer comfort
• Unique height adjustable harnesses
• Add a face shield for eye and face protection
• Compatible with MSA helmet mounted hearing protection

• Waterproof Hydrafort peached Polyester fabric. PVC coated Polyester Pongee fabric
• Taped seams
• Mesh lining to upper body. Concealed hood
• Concealed stud fastening. Adjustable shockcord hem
• Elasticated cuffs. 2 zipped lower pockets
• Internal mobile phone pocket, Zip entrance in lining for embroidery access
• Interactive - ideal to be worn with TRF532, Thor III fleece or TRA500 Sigma fleece jacket

• 20 x Assorted Washproof Plasters Sterile
• 2 x HSE 18x18 Premium Dressing
• 4 x Triangular Bandage Non Woven
• 6 x Antiseptic Wipes
• 1 x Vinyl i/w Pairs Gloves
• 6 x Safety Pins Assorted
• 1 x A4 First Aid Guidance Leaflet
• 1 x HS3 (020) First Aid Box
• 1 x Type 2 Wall Hanging Bracket
• 6 x HSE 12x12 Premium Dressing
• 2 x Premium No.16 Eye Pad with Bandage

Sizes:
  S- XXL

Fabric:
200g - 50% Cotton / 50% Polyester

Sizes:
M - XXL

Fabric:
200g - 50% Cotton / 50% Polyester

• Soft nylon brush head.
• Ideal for washing vehicles
• Requires a 4' wooden brush pole (code BH4)

Features:

• Safety Boots
• Midsole
• Antistatic
• Water Resistant
• Toe Protection
• Heel energy absorption

•  Is a fashionable workwear item as well as giving maximum comfort during prolonged use
• The new design Baseball Cap is fitted over an ABS liner to provide lightweight head protection where high impact resistance is not essential, but there is a risk of minor bumps or scrapes to the head.
• The CoolCap incorporates many new features and benefits, in particular large ventilation mesh panels, providing the maximum ventilation allowed within EN 812.
• The ventilation panels are on each side of the cap, thereby providing a improved flow of air, both reducing heat build up and increasing user comfort.
• The CoolCap comes fitted with a foam insert either side of the cap for additional comfort and side impact protection - making the sides of the CoolCap 45% more shock absorbent compared to a standard ABS liner. These side foam inserts are optional and are not necessary for the EN 812 test performance - so can be removed it preferred.
• Available in black or navy blue.

Standard

• 

  EN 342
  0,326 (B)
  (2,10 clo)
  3,3

• 

  EN 343
  3,3

• 

  EN 471
  3,2

Features:

• Forward/reverse rotation
• Electric Brake
• Job light

Comes with:

• 2 x 1.0 Li-ion Batteries
• Fast charger
• 2 x Phillips bits
• Carrying case

This Makita DF010DSE comes with a 1 year standard UK warranty.

• abrasive discs
• dust bag
• 12 month manufacturer's warranty

• Dual density sole made from PVC/PU
• Steel toe cap and midsole
• Approved to EN ISO20345 S1-P

Makita BHP451

High operation efficiency Makita drill with high torque. Keyless heavy duty metal chuck. Twin LED job light with afterglow. 

Powerful 3 speed 18 volt Combi Drill with Lithium-ion batteries which feature a high energy density technology that will deliver nearly 300% more working capacity during the lifetime of the battery when compared to traditional Ni-cad batteries.

At the same time the substantial weight saving provides increased operator comfort and safety.

18 volt Li-ion batteries provide high-energy capacity and accept more repeat charges giving a real 'long-life' service

• Max. in Steel: 13mm
  
• Max. in Wood: 65mm
  
• Max in Masonary: 16mm
  
• Max. Torque: 40/80
  
• Net Weight: 2.2kg
  
• Battery: Li-ion
  

Kit Contains

• BHP451 Combi Drill 
• Fast Charger
• 2 × 3.0Ah Lithium Ion Battery Cartridges
• 2 × screwdriver bits
• Side Handle
• Depth Rod

• ´Two loose nail pockets, can be placed in the front bellow pockets
• Two back pockets with bellows
• Rule pocket with pen pocket and knife-holder
• Hammer loop
• ´´Leg pocket´´ with telephone pocket
• Certified according to EU standard EN 471 cl 2, high-visibility warning clothing

• Compared with traditional toe caps in steel it is 51% lighter, even though it gives the same protection.

• Cast Aluminium Body for increased accuracy and job site durability.
• Beams cross at 90 degrees for precision set out.
• Thin narrow beams aid alignment and increase accuracy.
• One button operation for easy of use.
• IP 53 Protection for increased durability

• 2 x C-size alkaline batteries
• Target card
• Heavy duty carrying case

Orange certified to GO/RT 3279

• Sizes 72 - 128cm
• Fabric: Tradeguard 300g - 65% Polyester / 35% Cotton

• 100% Polyester - 330g
• Mesh lined wind block fleece
• Nylon reinforcements on shoulders, elbows and side panels
• Chest zip pocket
• 2 hand zip pockets
• Elastic cuffs
• Extended back
• Elastic loop for head-set

• 96% Cotton, 4% Lycra®
• Reflective brim
• Adjustable back
• Stretch band inside

• 100% Polyester
• Soft micro fleece - 155g
• Ragland sleeves
• Elastic cuffs
• Chest zip pocket
• Cheek flap at front
• Extended back

• Safety Boots
• EN ISO 20345 : 2004 S3
• Upper in Nubuck & Suede leather.
• Anti-abrasion toe cap
• DryFit® Lining
• Alu-Lite® Toe Cap
• ComfortPlus® Insole
• Flex-System® Midsole
• PU/TPU sole
• Weight: 650gr

• EN 471 - Class 1
• Outer-shell: 100% PU-coated PES
• Padded lining, 120g, 100% polyester
• Lining 100% Nylon
• Oil repellent
• Taped seams
• Full leg length zipper
• Detachable suspenders
• IMS / ClickOn™ -loops
• 3M® reflective tape
• Velcro adjustment at ankles

• 18V BATTERY 3.0AH NI-MH
• Battery Technology:Nickel Metal Hydride
• Battery Terminals:Surface Mount
• Energy Storage Capacity:3Ah
• Output Voltage:18V
• Battery Voltage:18V

• Forward/reverse rotation
• Double insulated for added safety
• Improved Casing
• Rigid Aluminum
• Anit-tilt device prevents screw sway
• Dust proof construction
• Silent Clutch

• Carry case
• Philips bit

Features:

• Powerful 1500w motor for improved performance, compound pivoting arm
• Bevel cuts up to 45° to the left mitre cuts 0-45° left and 0-52° right
• Positive stops at 9 settings; 15°, 22.5°, 30°, 45°, right or left and 0° (90° cuts)
• Precision machined aluminium base ensures accurate cuts, performs compound cutting operations
• Shaft lock for easy blade changes, includes 255mm 40 tooth carbide tipped blade
• Double insulated
• Electric brake

Comes with:

• TCT saw blade
• Dust bag
• Extension arms
• Vertical clamp

• individual muffs for the left and right ear
• new design and new colours
• brand new headband design for a better fit
• large muff providing more room for the ear
• thinner and more flexible noise reduction rings

160gsm (4.5oz) Nomex coverall. Fully flame retardant manufactured with triple feldlock stitching on all main seams for superior strength. Elasticated waist, two external breast pockets, two rear pockets, two swing pockets with access slits, rule pocket, stud adjustment at wrists and two concealed metal front zips with stud fastening to neck. Complete with 1" reflective tape. Exclusive to Wenaas UK Ltd.

Standard (EN):
531 A.B1.C1

STANDARDS

SIZING

COLOURS

• Two-coloured reversible blouson jacket
  
• With fixed lining
  
• Removable sleeves
  
• Approved to EN 343 3/3 and EN 471 2/2
  
• Front fastening with zipper
  
• Two reflective stripes at the height of the breast and at the shoulders
  
• One mobile phone-pocket at the height of the right breast and a little pocket for two pens
  
• Little pocket with zip on the right sleeve
  
• Two large side slits with touch-and-close fastening
  
• Knitted windcuffs
  REVERSIBLE
  
• One-coloured dark blue blouson
  
• One left breast-pocket with flap and touch-and-close fastening
  
• Two side slits with zip
  
• One mobilephone-pocket at the height of the right breast
  
• Knitted windcuffs

• Seamless fine Kevlar Liner
• PVC dipped
• Suitable for contact with foods
• Special treatment against hydrocarbon
• PVC dipped Kevlar liner
• This impermeable glove offers unequalled softness and is manufactured using a patented dipping process. It combines the performance of a fine knit made from highly cut resistant Kevlar with that of PVC, which offers the best possible protection against most noxious chemicals and mechanical hazards (abrasion, tearing). In addition, the glove’s resistance and longevity are enhanced by a special hydrocarbon treatment. The rough finish that covers the entire hand ensues that objects are gripped securely and increased abrasion resistance. The wrist is protected by a smooth sleeve. PVC does not cause allergies.
• Design Features
• The glove’s anatomical shape facilitates movement.
• The seamless antibacterial liner prevents irritation.
• Can be washed at 40°C using a neutral detergent.
• Glove Applications
• ... decontamination work, drilling and boring, fishing, oilrigs, petrochemistry, refuse collection and sorting, sewers...

• The Footcare specialists at Scholl have developed the innovative "GEL INSOLE".
• Featuring: Breathability - Thanks to the holes in the front part
• Abrasion resistant fabric lined
• Antistatic
• Soft EVA for a greater comfort while walking
• Reinforced areas designed in order to ensure a massage effect
• Hard EVA for greater support in the arch of the foot area
• GEL insert - Absorbs 3x more than a standard insole & Memory cushion non-deformable technology
• Perfect fits to foot anatomy

Designed for office / factory operatives this safety shoe is crafted for a professional image whilst maintaining comfort and safety.

• S1 safety rated
  
• Professional shoe with steel toe cap
  
• 200 degree temperature resistance
  
• Petrol, oil & chemical resistant
  
• Materials: Leather upper, & antistatic and energy absorbing heel, dual density TPU sole

• • Sweater with collar
• •  Rib knitted wristlets

• • White seams
• •  Lined with 300 g pile in the torso
• •  Quilt lined sleeves
• •  Two breast pockets
• •  Two slanting pockets
• •  Sleeve pocket with zip and pen pockets
• •  Extended back
• •  Adjustable waist
• •  One-way zip at the front
• •  Telephone pocket
• •  Key loop

• Berghaus’ own AWL 200 is a classic mid weight polyester fleece which has a high warmth to weight ratio. Dries quickly and is easy care.
• Interactive zip feature allows it to be zipped into any Interactive shell for extra protection.
• Two large zipped hand warmer pockets.
• Deep snug neck and self fabric cuffs for extra warmth.

]]> sales@suresafe.co.uk (Suresafe Protection Ltd.) http://www.suresafe.co.uk/index.php?main_page=product_info&products_id=1019 Fri, 18 Sep 2009 12:16:36 +0100 http://www.suresafe.co.uk/index.php?main_page=product_info&products_id=1401 http://www.suresafe.co.uk/index.php?main_page=product_reviews&products_id=1401

• • Ribbed knitted collar and sleeves
• •  Breast pocket

Fitting: Medium Wide

Lining: Leather/Textile

Sole: Cemented Construction Durable Rubber

Additional: 200 Joules Toe Protection

• 2 TCT blades
• 24 tooth SERIES 60 saw blade
• fence centre support
• 2 bench mounting bolts
• blade spanner

DOES NOT INCLUDE SCREEN - CARRIER ONLY, USE CODE FL800A, FL800P, FL800AN

• 80% Polyamide / 20% Spandex / Lycra softshell - 380g
• Lining: Soft micro fleece
• Chest zip pocket
• 2 hand zip pockets
• 2 deep inner pockets
• Elastic cuffs

Stylish looks with the Cool Comfort of Cotton.

Features:
No shoulder seams
Ragland sleeves
Flat lock seams
Reflective print on sleeve
Print in front

Material: 100% Cotton 165 g

Sizes Available: 1-8

• UPPER - Soft full grain leather
• LINING - Leather
• SAFETY TOE CAP - Traditional Steel
• PIERCE RESISTANCE - No Under foot protection
• FOOTBED - Comfort Plus
• SOLE - Soft PU Comfort inner layer
• OUTER SOLE - Antislip, antistatic and hard wearing PU

  Complies with En 20345 S2

Sizes Available: 3-8

• For all-round easier operation
• Easier, more efficient chip / sawdust ejection
• Anti kick-back riving knife
• Electronic brake
• Double insulated for added safety
• Soft start

• Carbide-tipped saw blade
• Rip fence (guide rule)
• Hex wrench
• Carry Case

• 2 x 14.4v x 1.3Ah NiCD batteries
• 30 minute charger
• 2 speed settings
• Forward & reverse action
• Variable speed control
• No load speed 0-1200/0-350rpm
• Blows per minute 0-18000/0-5250bpm
• Torque settings 32;20/36Nm
• Electric brake
• Maximum capacity in steel 10mm, in wood 25mm, in masonry 10mm
• Maximum size of woodscrew No14
• Carrying case
• Weight 1.7kgs
• Supplied with a full UK industrial warranty 

• Abrasive papers (pack of 6)
• punch plate
• dust bag assembly
• 12 month manufacturer's warranty

• pack of 6 abrasive sheets
• dust bag assembly